ABOUT CRAFCO

Crafco is the world’s leading manufacturer in quantity and diversity of pavement preservation products for asphalt and concrete such as hot-applied crack sealants, silicone joint sealants, hot-applied mastics, and cold-mix for pavement surface patching and repair, and is the only company to manufacture the equipment to apply them.

Additionally, Crafco manufacturers silicone, geocomposites; produces and supplies specialized preservation products to the roofing, waterproofing and athletic surfacing industries, and installs world-class running tracks and manufactures and installs premier sport court surfaces.

Pavement preservation products developed by Crafco have demonstrated through long- and short-term independent studies to extend pavement service life and help extend the life of pavement surface treatments.
From asphalt and concrete pavements, to bridges, to airport runways, racetracks and canals, sport courts and running tracks; Crafco manufactures specialty products that seal, protect, repair, strengthen, preserve, and extend the service life of infrastructure around the world.
________________________________________
Since 1976, Crafco has delivered confidence through innovation, quality, and value and is proud to manufacture products in the USA with many manufacturing locations nationwide.

 

FEATURED PRODUCTS

Road Saver Hot Applied Pavement Crack Sealant

The best solution to keep drivers happy and roads healthy is to apply pavement preservation treatments early and often, and research demonstrates the best preservation treatment is crack sealing.

Crack sealing is an important preventive treatment and among the many different preservation treatment types available, has the highest benefit-cost ration (BCR). The four-year average cost for cracking sealing is 26 cents per sq. yd., while the next cheapest treatment— single chip seal, or spray seal—is four times more expensive. As any good investor would assert, you invest in crack sealing because it provides the highest benefit for the lowest cost, therefore maximizing your investment. Without crack sealing, 75% of cracks form into potholes in less than three years. With crack sealing, only 1% of sealed cracks develop into potholes in less than three years. A sealed crack provides better sustained smoothness over a five-year period versus an unsealed crack as measured by the International Roughness Index. In a nutshell, crack sealing is the best surface treatment to:

  • Extend the service life of pavement;
  • Save money; and
  • Extend a smooth, safe, enjoyable driving experience.
Crafco Super Shot Melter

Crafco Super Shot Melter/Applicators are engineered to answer todays challenges that have developed from higher energy costs and smaller budgets. The high-performance Super Shot machines exceed all expectations, quickly and economically. A contractors GOLD choice award since 2014, no other machine on the market today can match Crafco’s Engineered Performance Machines.
The Crafco Super Shot series melter/applicator represents the most technologically advanced melter/applicator available. This state-of the- art machine offers the ultimate in efficiency and ease of use. The digital control features of this equipment accurately control and regulate the heating temperature of the sealant and transfer oil. The patented internal pumping system requires no clean out and features a hydraulic flow rate adjustment. The internal pump only operates when the operator activates the micro-switch on the applicator wand. With “On Demand” pumping there are no valves, fewer moving parts and no hose pressure build up resulting in more output, profit and savings. Super Shot melters will out-perform any comparable sized machine available. Crafco offers a two-year warranty, various options, and many safety features, making these machines the greatest value with the highest productivity. The Crafco Super Shot Melter is the most efficient and easy to use melter/applicator available today!

Action Pave Pavement Sealer

Sealcoating with Crafco sealers protects asphalt pavement from water, oil, fuel, UV rays, de-icing salts, and other harmful elements. If pavement is left untreated, the aforementioned harmful elements degrade the top layer soon after the asphalt installation, causing surface cracks. This allows water to penetrate and make the pavement brittle and susceptible to structural damage. It’s best to begin a sealer strategy at the start of a pavement’s life, but if you’ve waited until your pavement has started to show signs of aging, it’s not too late. Crafco pavement sealers can preserve pavement life and beautify older pavement.

Sealcoating provides a variety of benefits. Sealcoat bonds firmly to the surface to provide an even-textured, durable barrier against water penetration, and shields the pavement surface from the drying action of the sun and ultraviolet rays. Sealcoat resists damage caused by gasoline and oil, while restoring the rich, black look of new pavement. Sealcoating beautification of parking lots, driveways, and other commercial and residential properties improve first perceptions and property values. Another benefit is sealcoating makes it easier to maintain and clean the pavement. The smooth barrier provided by sealcoating offers less resistance when sweeping or power washing the pavement, so superior results can be obtained with less effort. Sealcoating also accelerates the time it takes ice and snow to melt, which makes the pavement safer for the motoring public.

Designed for the contractor, the Crafco Super SEALCOATER comes loaded with standard features that are considered options on all other competitive seal coat machines. Quality parts and superior construction make the Super SEALCOATER the machine of choice for everyday rigorous use. Features such as the unbreakable steel tank to the oversize hydraulic system set this unit apart from all the others. Built with Crafco quality and engineered to last, choose the Super SEALCOATER as your next seal coat machine.

Crafco High Performance (HP) Cold Patches

Cold Patch, also known as cold mix, was first recognized as a way to make repairs quickly because it can be applied right from the container without heating. It is a plant-produced mixture of quality construction aggregate and liquid asphalt cement binder that is used for patching both asphalt and concrete pavements.

HP Asphalt Cold Patch does not require heavy rolling machines or special applicators. It can be shoveled or poured into a pothole or utility cut and tamped down with a hand tool, then opened to traffic immediately. No mixing is required and the easy-to-use bags prevent waste, which saves money. HP Asphalt Cold Patch doesn’t require messy clean-up time and adheres to asphalt, concrete or steel.

Crafco HP Concrete Patch is a unique, gray colored, cold applied, single component patching material. It is used for repairing potholes, spalls, cracks and other confined voids and distresses over 1 inch wide and greater than ½ inch deep, in cement concrete pavement, slab and deck surfaces. It can also be used to repair roads, highways, streets, airport pavements, parking lots, bridge and parking decks, sidewalks, walkways and floors.

To use, Crafco HP Cold Patch is simply removed from the bag, placed into the prepared area to be patched, leveled and then compacted. Because there is no need to heat or mix material, repairs can be completed within just a few minutes, minimizing delay to motoring public. The installation can be done with as few as 1 or 2 workers and does not require special equipment, which means “in house” staff can perform patching. Bags are easy to use and will eliminate the need for special equipment. Plus multiple vehicles can carry bags which can increase the production of the patching operation

 

REQUEST INFORMATION

Would you like to be contacted by this sponsor? Enter your contact information below.

Do NOT follow this link or you will be banned from the site!